Tucked front end
Dooly™ Runners by Woody’s®
The Dooly™ design has TWO 7/16” Flat-Top® runners, each with 4”, 6” or 8”
of turning carbide mounted as a unit. A pair of Dooly’s™ creates four lines on
the snow surface which will help decrease darting of the snowmobile as it makes
it’s own groove in the trail. Other features on each runner include hard weld
at the front of each runner and a 1-1/2” carbide wear pad on the rear. The
extended mounting studs will ensure solid installation on the ski. Each Dooly™
runner packaged individually. Woody’s quality guraranteed.
FOR APPLICATIONS AND PART NUMBERS, PLEASE SEE SNOWMOBILE 2019 CATALOG P. 662-665
SLIM JIM RUNNERS
WOODY’S® SLIM JIM ™
Woody’s® has designed this runner specifically for riders who love the reduced darting
feature of our original Dooly™ and also want a more performance enhanced
product when cornering. Woody® Slim Jim™ is more responsive in the corners
and comes in at a whopping 31% lighter than our original Dooly™. Available with
4” 6” and 8” of 60° turning carbide. Each sold separately.
FOR APPLICATIONS AND PART NUMBERS, PLEASE SEE SNOWMOBILE 2019 CATALOG P. 666-668
1-1/2” carbide wear pad 4” of 60° turning carbide
4” Extender Trail III™ Flat-Top®
This is a popular runner for trail riding. It has 4” of 60° turning carbide, with domed 1 1/2” carbide wear pads
at each end of the full length hardweld. Woody’s offers the Extender Series to replace the manufacturer’s stock
runners for added cornering control, especially when the trail begins to get icy. Our guideline for consideration
of the Extender Series would be up to 72 studs installed in the track.
1-1/2” carbide wear pad 6” of 60° turning carbide
6” Trail Blazer IV™ Flat-Top®
This runner is for the trail rider looking for more performance in cornering power and control. The turning
carbide is 6” long with a 60° edge. Hardweld covers the full length of the area between the turning carbide
and the carbide wear pads. It has a large 1/2” diameter bar for strength and 3/8” ski mounting bolts. This
runner is designed to use with 72 to 144 studs installed in the track. It is essential that the track be studded
when using this runner.
8” Executive™ Series Flat-Top®
The Executive Series runner is designed for performance trail riders and cross-country racers. The 8 inches of
60° carbide provides turning power for the experienced rider. The carbide of this runner must be balanced
with a studded track. A guideline to follow would be to have 144 to 192 studs installed in your track before
considering this performance bar on the trail or cross-country course.
mounting studs 7/16”
Carbide wear pads
Full-length carbide wear pads 10” of
60° turning carbide
4”, 6” or 8”
10” Ultra series
This premium performance carbide runner is designed for very energetic trail riders and cross-country racers
who demand superb cornering control. The extra long 10” of turning carbide with a sharp 60° cutting edge
provide that control. A high profile runner bar and full-length carbide wear pads protect the runner from
premature wear. This runner will handle heavily studded sleds - 192 or more studs for proper balance between
the studs and this Ultra Series Bar.
Top-Stock™ is an economical hardweld runner designed for
extreme service or utility applications. The 1/2” host bar
with hardweld increases the depth of the runner for added
controllability. Recommended for deep snow or snowmobiles
with 48 or fewer studs installed.
1-1/2” carbide wear pad 8” of 60° turning carbide
FOR APPLICATIONS AND PART NUMBERS, PLEASE SEE SNOWMOBILE 2019 CATALOG P. 669-674
10” Sno-Cross competition Flat-Top®
Woody’s designed this runner specifically for Sno-Cross racing. This bar meets all the specifications required to be race legal without
any modifications. This bar features 10” of 60° turning carbide on a Flat-Top® 5/8” height profile bar with 3/8” mounting bolts.
This Flat-Top® design, available only from Woody’s, minimizes rocking by providing a greater support surface between the runner
and the ski. This will give the sno-cross racer the precise steering that can be depended on. Woody’s has designed a runner that is
ready out of the box.
Woody’s designed the Competition Bars for Cross Country and oval racing. When used with tracks studded for
competition, this carbide runner keeps the front end from “pushing” during high speed cornering. This bar
has 60° turning carbide on a Flat-Top® 5/8” height profile bar with 3/8” mounting bolts. Available in 5”,
8”, 10” or 14”. This runner is a proven winner.
Woody’s longer studs
allow for the use of
plastic ski covers.
runner ease sled
unloading from trailer
Flat Top® competitive runners
Competion bars not recommended for trail use
This is where it all started, Woody’s Carbide Runners! Woody’s commitment to quality race products and racers
has not wavered since the first pair of runners was delivered to Dana Wiltse in the sixties. We use only the
best materials. Woody’s is equipped with state-of-the-art equipment to manufacture the most advanced and
durable runner on the market.
INTERNATIONAL ENGINEERING & MANUFACTURING, INC. WARRANTS each product manufactured by it to be free from defects in material and workmanship under use for the purpose for which it is intended. The Company shall not be liable for damage or delays caused by defects caused by defective materials or workmanship; is limited
to the repair or replacement at its factory of defective article or part thereof, which may be returned to the factory, transportation charges prepaid, within one (1) year after delivery to the original purchaser. Proof of purchase is also required. The Company shall be the sole judge of the existence of any defect in the article so returned. No
claims for charges incurred in the removal, disassembly or reinstallation of such article shall be allowed. Product manufactured for consumer use on snowmobiles is designed for snow or ice only, use on any other surface voids warranty. This Warranty shall not cover any article which has been misused or neglected or damaged by accident or
any article which has been altered outside the Company’s factory. Does not cover bending, chipping, flaking or carbide pin breakage or pin loss from stud wear, stud replacement labor or shipping. The Company shall, in no event be liable for consequential damage or contingent liability arising out of any total or partial failure to function of
any article manufactured by it or of any equipment on or in which it is used. Failure of a user to give notice to claim as to defect claimed under the provisions of this Warranty within 1 year after delivery to original user, such claim shall constitute a waiver by consumer of all claims with respect to goods and equipment. No express, implied,
or statutory warranty other than that herein set forth is made or authorized to be made by the Company. All returned warranties will not be accepted without return authorization number.
FOR APPLICATIONS AND PART NUMBERS, PLEASE SEE SNOWMOBILE 2019 CATALOG P. 674-675