WOODY’S CARBIDE RUNNERS
Flat-Top® runner design
Flat-Top® runner has more support surface
Flat Top® trail runners
To provide steering traction on hard-packed or icy surfaces, carbide runners are an essential part of
traction and control products. Woody’s carbide runners are designed to provide you with the added
grip and turning ability you need for a variety of challenging conditions.
Woody’s manufactures their runners with the finest carbide and steel. Extra long mounting bolts and
flanged lock nuts allow for fast and easy installation. Our exclusive Flat-Top® surface provides maximum
support. Our rear angle cut prevents catching when reversing or unloading.
Balancing the length of carbide in your runner in ratio to the number of studs is a must. The number
of studs you put in your track will determine the length of carbide you will need on your skis.
Woody’s. The name you rely on for safety, performance and control.
Now has a 60° Carbide For Better Traction
1-1/2” carbide wear pad 4” of 60° turning carbide
4” Extender Trail III™ Flat-Top®
This is a popular runner for trail riding. It has 4” of 60° turning carbide, with
domed 1 1/2” carbide wear pads at each end of the full length hardweld.
Woody’s offers the Extender Series to replace the manufacturer’s stock runners
for added cornering control, especially when the trail begins to get icy. Our
guideline for consideration of the Extender Series would be up to 72 studs
installed in the track.
1-1/2” carbide wear pad 6” of 60° turning carbide
6” Trail Blazer IV™ Flat-Top®
This runner is for the trail rider looking for more performance in cornering power
and control. The turning carbide is 6” long with a 60° edge. Hardweld covers
the full length of the area between the turning carbide and the carbide wear
pads. It has a large 1/2” diameter bar for strength and 3/8” ski mounting bolts.
This runner is designed to use with 72 to 144 studs installed in the track. It is
essential that the track be studded when using this runner.
1-1/2” carbide wear pad 8” of 60° turning carbide
8” Executive™ Series Flat-Top®
The Executive Series runner is designed for performance trail riders and
cross-country racers. The 8 inches of 60° carbide provides turning power for the
experienced rider. The carbide of this runner must be balanced with a studded
track. A guideline to follow would be to have 144 to 192 studs installed in your
track before considering this performance bar on the trail or cross-country course.
Proper track studding is mandatory with the use of this runner. Dangerous loss of snowmobile control may occur without the proper studding amount installed in the track to balance
with the 10” of carbide in the runner.
Full-length carbide wear pads 10”
of 60° turning carbide
10” Ultra series
This premium performance carbide runner is designed for very energetic trail
riders and cross-country racers who demand superb cornering control. The extra
long 10” of turning carbide with a sharp 60° cutting edge provide that control.
A high profile runner bar and full-length carbide wear pads protect the runner
from premature wear. This runner will handle heavily studded sleds - 192 or more
studs for proper balance between the studs and this Ultra Series Bar.
Top-Stock™ is an economical hardweld runner designed for extreme service or
utility applications. The 1/2” host bar with hardweld increases the depth of the
runner for added controllability. Recommended for deep snow or snowmobiles
with 48 or fewer studs installed.
Woody’s® ACE™ RUNNER
Woody’s ACE™ single runner line utilizes a 3/8” x 1/2” preformed steel square
bar. The ACE has a taller profile and is more aggressive, providing excellent
control on rider forward sleds. Available in 8” carbide for trail users in our most
popular number series.
Navigator™ ski protector
Every Pilot needs a Navigator. Woody’s Navigator™ ski protector is exactly that,
an accessory that will protect your Pilot skis from wear. While protecting your
ski it will also help reduce darting. The Navigator™ works with any single Pilot
runner in the market that has a host bar up to 1/2 inch.
389-8486 Navigator Ski-Doo Pilot ski protector
389-8978 Navigator Polaris 1300 Series ski protector