WHEEL BEARING & SEAL
All Balls Wheel Bearing and Seal Kits contain all of the bearing and seals required to re-fit a wheel. We offer the most extensive line of kits
for street, off-road and ATV applications. Our experience is that wheel bearings typically fail from water and dirt contamination. The All
Balls wheel bearing was developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power
Sport Industry. The All Balls bearing is a premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide
superior exclusion of water and dirt and improved grease retention. The All Balls, Type TC, Nitrile Elastomer wheel seals are specifically
designed to keep out water and dirt. The rubber coated outside diameter creates an optimum seal at the hub. The steel garter spring
guarantees constant pressure on the axle shaft over the life of the seal.
ATV Differential Bearing & Seal Kits
Each All Balls Differential Bearing and Seal Kit contains all of the bearings
and seals required to service an ATV differential. Included are easy to use
application diagrams for identifying bearing and seal locations.
ATV a-arm bearing & seal kits
All Balls A-Arm Kits are direct OE replacement parts designed to rebuild the A-Arm to factory specification.
A-Arm shafts are manufactured with 52100 heat treated bearing steel for improved performance and
Swing arm bearing kits
All Balls Swing Arm Repair Kits contain all of the bearings, shafts, seals
and bushings required to rebuild a swing arm to factory specifications. The
All Balls shafts are manufactured from 52100 bearing steel for improved
performance and extended life. The All Balls kits feature TeflonD coated
washers in place of the thrust needle bearings. The Teflon (D coated
washer offers superior resistance to dirt, water and lack of lubrication
which are all factors leading to premature failure.
Swingarm linkage bearing & seal kit
All Balls Swing Arm Linkage Repair Kits contain all of the bearings (including the lower shock bearing
kit), shafts, seals and bushings required to rebuild swing arm linkage to factory specifications.
The All Balls Swing Arm Linkage Repair Kits are the most complete kit in the industry!
Crankshaft bearing & seal kits
All Balls Crankshaft Bearing and Seal Kits feature Koyo and Nachi
precision Japanese crank bearings. The crankshaft seals feature an arbon/
fluorocarbon pad on the seal lip and stainless steel garter springs. This
reduces start up friction enhancing dry start performance and reducing
crank pin wear.
Steering bearing & seal kits
All Balls Steering Stem Bearing Kits update loose ball bearings with heavy duty taper bearing replacements.
The kits come complete with both the upper and lower taper bearing cups and cones and seals (top and
bottom seals are included in most kits).
Upper & Lower Shock Bearing & Seal Kits
Each All Balls Upper or Lower Shock Bearing Kit contain the bearing and
all of the seals, spacers and pins (if required) to rebuild the shock bearing
to factory specifications.
Tie rod end kits
All Balls Tie Rod End Kits contain inner and outer tie rods that are designed to repair loose and worn tie rod ends.
ATV ball joint kits
Ball joint kits is sold per A-Arm and comes with snap ring and cotter
pin. Put an end to premature Honda ball joint failure with our HD
steel joint. Upgraded from the OE aluminum joint to a steel case
with POM-M90 bearing material for long life.
For pricing, visit www.motovan.com in the dealer section. 19 1063