Maximum temperature sleeve retainer
• OEM specified • Designed to increase the strength of press fit or retain slip
fits where higher temperature resistance is required • Fixtures in 30 minutes
at room temperature, but requires a secondary heat cure to generate high
temperature resistance • Bonds cylindrical parts with diametral gaps up to
0.015” (0.35mm) • Provides shear strength of 3,800 PSI on steel after 24 hrs.
• Temperature range up to 230°C (450°F)
Applications: Bearing, bushings, cylinder sleeves, valve guides, cup/core plugs
and similar assemblies where higher temperature resistance is required.
High performance thread sealant
• OEM specified • Locks and seals threaded fittings • Resists leakage and
vibration loosening • Formulated specifically for metal, tapered pipe thread
fittings • Replaces Teflon® tape and pipe dopes • Cures rapidly to withstand
10,000 PSI • Perfect as a replacement for Vibra-Seal® pre-coated parts •
Prevents galling and protects mated threaded areas from rust and corrosion
• Resists all auto shop fluids, fuels and gases • Paste formulation seals larger
diameter fittings and won’t run • Temperature range up to 150°C (300°F)
Applications: Stainless steel fittings, head bolts into through holes, oil PSI
sending units/sensors, oil and coolant lines, intake manifold switches, rear axle
fill plug, fuel fittings.
27-19545 50 ml (56521)
SPECIALIZED MAINTENANCE & REPAIR
Bearing mount for relaxed fit
• OEM specified • High strength, medium viscosity anareobic adhesive for slip
fit assemblies • Fixtures in 10 minutes at room temperature • Provides 4,000
PSI shear strength on steel after 24 hrs. • Temperature range -54°C to 150°C
(-65°F to 300°F)
Application: Wheel bearings, idler shaft, press fit bearings; replaces set screws,
clamp rings, snap rings.
Threadlocker Gel Twist™
Blue medium Strength Gel and Red High Strength Gel in the patent-pending
Gel Twist™ applicator puts the threadlocker where you want it...on the parts!
No more drips or solid stick globs. No more mess to clean or costly waste.
Permatex® Gel Twist™ Threadlockers provide “liquid quality” reliability
without the problems.
27-24215 10g Blue (24215)
27-27115 10g Red (27115)
High temperature thread sealant
• OEM specified • Locks and seals threaded fittings • Designed to provide an
extremely reliable seal on any metal pipe thread fittings and plugs • Resists
leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels •
Lubricates threads for easy assembly and disassembly • Will not loosen in
service but can be easily removed with hand tools • Parts may be repositioned
up to 4 hours after application • Resists all auto shop fluids, fuels and gases •
Temperature range up to 204°C (400°F)
Applications: Head bolts into through holes, oil PSI sending units and sensors,
oil and coolant lines, fuel fittings, rear axle fill plug, brake and power steering
27-234 Tube 50ml (59234)
27-079 Bottle 36 ml (62040)
Ultra Slick™ Engine Assembly Lube
• Proper lubrication of metal mating surfaces is essential prior to starting
a new or rebuilt engine • Has superior adhesion to component surfaces to
prevent scuffing and galling during initial start-up • Meets or exceeds OEM
performance specs for engine assembly lubricants
Applications: Engine bearings, camshafts, lifters, valves, guides and rocker
27-81950 Bottle 118ml (81950)
* Available while supplies last 27-68050 50 ml (68050)