
1903
Shaft holding tools
• Hold fork damping rods, cartridges, etc. while servicing (aluminum)
377-2680 10,12,12.5,14mm TFSH 10
377-2683 14,16,18mm (shocks.) TFSH 14
377-2681 20,24,29mm TFSH 20
377-2682 32,35mm TFSH 32
Fork oil Level Tool
• Made out of durable composite material with a collapsible metal tube
allowing for easy, accurate adjustment of fork fluid levels • Designed to fit
comfortably in your toolbox without the flimsy hoses or tubes to get in the way
377-2636 Pro Model
377-2670
Fork seal drivers
• For inverted and conventional forks
• The 41/40mm version is especially useful for WP forks as the factory tool can
be difficult to use
377-2670 For 30mm fork TFSD 30
377-2671 For 33mm fork TFSD 33
377-2650 For 35mm fork TFSD 35
377-2651 For 37/36mm fork TFSD 37
377-2652 For 38/39mm fork TFSD 39
377-2653 For 41/40mm fork TFSD 41
377-2654 For 43mm fork TFSD 43
377-2655 For 45/46mm fork TFSD 46
377-2656 For 47/48mm fork TFSD 48
377-2657 For 49/50mm fork TFSD 50
Twin chamber cartridge fork holding tool
• Allows you to more easily disassemble and essemble Twin Chamber forks
• When applied, the tool holds the rod allowing you to loosen or tighten the
bottom nut on the cartridge rod • Very useful for street bike as well
377-2684 Regular cartridge 10/12/12.5 TFHP 01
Fork cap tools
• Anodized aluminum fork cap wrench fits 46/50mm fork caps • Steel wrench
fits 49mm firk caps used on 2005 KYB forks
377-2702 Showa 46/50mm TFCW 4650
377-2685 KYB 45/49mm TFCW 45/49
377-2618 50mm TFCW 50H
377-2606 WP 48 TFCW 02
377-2711 24/32/41mm TFCW 2432
Fork compression damping adjuster tool
• Facilitate the access to the forks during adjustments • This tool is flat and is
adjusted easily under the handlebar of the majority of the vehicles. • The fitter
is equipped with an enclave to allow an alignment with the clicker
377-2630 TFCA 01
Fork bleeding tools
• Adjust yourself easily along the forks • Conceived so that the oil flows are
done there, thus eliminating the usual damage • Each unit included 2 tools
377-2633 TBFT 02S
Fork cartridge holding tool
• When applied, the tool holds the rod allowing you to loosen or tighten the
bottom nut on the cartridge rod.
377-2635 Tech 01 (.31 x 1.08)
377-2616 Tech 03 (.20 x 1.37)
377-26101 FK CART Holding tool,Yamaha 09-11 R1