Page 102

2017snowatvutvcollection

dooly runner Tucked front end Dooly™ Runners by Woody’s® The Dooly™ design has TWO 7/16” Flat-Top® runners, each with 4”, 6” or 8” of turning carbide mounted as a unit. A pair of Dooly’s™ creates four lines on the snow surface which will help decrease darting of the snowmobile as it makes it’s own groove in the trail. Other features on each runner include hard weld at the front of each runner and a 1-1/2” carbide wear pad on the rear. The extended mounting studs will ensure solid installation on the ski. Each Dooly™ runner packaged individually. Woody’s quality guraranteed. FOR APLICATIONS AND PART NUMBERS, PLEASE SE SNOWMOBILE 2016 CATALOG P. 511-512 slim jim runners Woody’s® Slim Jim ™ Woody’s® has designed this runner specifically for riders who love the reduced darting feature of our original Dooly™ and also want a more performance enhanced product when cornering. Woody® Slim Jim™ is more responsive in the corners and comes in at a whopping 31% lighter than our original Dooly™. Available with 4” 6” and 8” of 60° turning carbide. Each sold separately. FOR APLICATIONS AND PART NUMBERS, PLEASE SE SNOWMOBILE 2016 CATALOG P. 513-514 carbide runners 1-1/2” carbide wear pad 4” of 60° turning carbide 4” Extender Trail II™ Flat-Top® This is a popular runner for trail riding. It has 4” of 60° turning carbide, with domed 1 1/2” carbide wear pads at each end of the full length hardweld. Woody’s offers the Extender Series to replace the manufacturer’s stock runners for added cornering control, especially when the trail begins to get icy. Our guideline for consideration of the Extender Series would be up to 72 studs installed in the track. 1-1/2” carbide wear pad 6” of 60° turning carbide 6” Trail Blazer IV™ Flat-Top® This runner is for the trail rider looking for more performance in cornering power and control. The turning carbide is 6” long with a 60° edge. Hardweld covers the full length of the area between the turning carbide and the carbide wear pads. It has a large 1/2” diameter bar for strength and 3/8” ski mounting bolts. This runner is designed to use with 72 to 144 studs installed in the track. It is essential that the track be studded when using this runner. 8” Executive™ Series Flat-Top® The Executive Series runner is designed for performance trail riders and cross-country racers. The 8 inches of 60° carbide provides turning power for the experienced rider. The carbide of this runner must be balanced with a studded track. A guideline to follow would be to have 144 to 192 studs installed in your track before considering this performance bar on the trail or cross-country course. Extended mounting studs 7/16” Runner material 1-1/2” Carbide wear pads Full-length carbide wear pads 10” of 60° turning carbide Hard weld 4”, 6” or 8” Turning carbide 10” Ultra series This premium performance carbide runner is designed for very energetic trail riders and cross-country racers who demand superb cornering control. The extra long 10” of turning carbide with a sharp 60° cutting edge provide that control. A high profile runner bar and full-length carbide wear pads protect the runner from premature wear. This runner will handle heavily studded sleds - 192 or more studs for proper balance between the studs and this Ultra Series Bar. Top-Stock™ Series Top-Stock™ is an economical hardweld runner designed for extreme service or utility applications. The 1/2” host bar with hardweld increases the depth of the runner for added controllability. Recommended for deep snow or snowmobiles with 48 or fewer studs installed. 1-1/2” carbide wear pad 8” of 60° turning carbide FOR APLICATIONS AND PART NUMBERS, PLEASE SE SNOWMOBILE 2016 CATALOG P. 515-519 competition runners 10” Sno-Cross competition Flat-Top® Woody’s designed this runner specifically for Sno-Cross racing. This bar meets all the specifications required to be race legal without any modifications. This bar features 10” of 60° turning carbide on a Flat-Top® 5/8” height profile bar with 3/8” mounting bolts. This Flat-Top® design, available only from Woody’s, minimizes rocking by providing a greater support surface between the runner and the ski. This will give the sno-cross racer the precise steering that can be depended on. Woody’s has designed a runner that is ready out of the box. Competition Series Woody’s designed the Competition Bars for Cross Country and oval racing. When used with tracks studded for competition, this carbide runner keeps the front end from “pushing” during high speed cornering. This bar has 60° turning carbide on a Flat-Top® 5/8” height profile bar with 3/8” mounting bolts. Available in 5”, 8”, 10” or 14”. This runner is a proven winner. Woody’s longer studs allow for the use of plastic ski covers. Woody’s angle-cut runner ease sled unloading from trailer decks. Flat Top® competitive runners Competion bars not recommended for trail use This is where it all started, Woody’s Carbide Runners! Woody’s commitment to quality race products and racers has not wavered since the first pair of runners was delivered to Dana Wiltse in the sixties. We use only the best materials. Woody’s is equipped with state-of-the-art equipment to manufacture the most advanced and durable runner on the market. Limited warranty INTERNATIONAL ENGINEERING & MANUFACTURING, INC. WARRANTS each product manufactured by it to be free from defects in material and workmanship under use for the purpose for which it is intended. The Company shall not be liable for damage or delays caused by defects caused by defective materials or workmanship; is limited to the repair or replacement at its factory of defective article or part thereof, which may be returned to the factory, transportation charges prepaid, within one (1) year after delivery to the original purchaser. Proof of purchase is also required. The Company shall be the sole judge of the existence of any defect in the article so returned. No claims for charges incurred in the removal, disassembly or reinstallation of such article shall be allowed. Product manufactured for consumer use on snowmobiles is designed for snow or ice only, use on any other surface voids warranty. This Warranty shall not cover any article which has been misused or neglected or damaged by accident or any article which has been altered outside the Company’s factory. Does not cover bending, chipping, flaking or carbide pin breakage or pin loss from stud wear, stud replacement labor or shipping. The Company shall, in no event be liable for consequential damage or contingent liability arising out of any total or partial failure to function of any article manufactured by it or of any equipment on or in which it is used. Failure of a user to give notice to claim as to defect claimed under the provisions of this Warranty within 1 year after delivery to original user, such claim shall constitute a waiver by consumer of all claims with respect to goods and equipment. No express, implied, or statutory warranty other than that herein set forth is made or authorized to be made by the Company. All returned warranties will not be accepted without return authorization number. FOR APLICATIONS AND PART NUMBERS, PLEASE SE SNOWMOBILE 2016 CATALOG P. 519


2017snowatvutvcollection
To see the actual publication please follow the link above