Page 1274

2017roadiron-cruiser_en

1274 Head bolt torque gauge This accurate gauge allows the measuring of 90° when tightening Evo® head bolts. Torque sequence lasered on gauge with instructions. 53-0188 Use on all Evo® models, 84-UP XL, 99-UP Twin Cam Head holder tool Use to hold head in vice through spark plug hole. has 14mm and 12mm ends. Use on Big Twin® (1948-present), Sportster® (1957-present) and Buell® (1987-present). 53-0165 Valve guide seal installer tools These valve guide seal installer tools will install each guide seal evenly and square on the top of each guide. Factory driver spacer not required with JIMS tool. Order handle separately for use on seal installer tools. Refer to chart for correct handle usage. 53-948 Use on 110” valve guides requiring H-D® seal No.18046-98 Use with Handle # 53-0380 53-0376 Use on all Big Twin models 84-04 with .560” Dia Guides Use with Handle # 53-0380 NOTE: Includes all aftermarket heads Shoulderless valve guide installer tools These valve guide installer tools will install each guide to the correct depth when installed into head. Remover handles are used as handle for installer tools. Must be ordered separately. Refer to chart for correct handle usage. Use tool 53- 0002 or 53-0143 for removing or installing shoulder type valve guides. 53-938 Use on all T/C 2005 and later that use the 7mm valve guides. Use on 04-UP Sportster®. 2004-UP Buell® Twins except 1125R Use with Handle # 53-937 53-0377 Use on all Big Twin motors with about .560” Dia.. O.D., Includes aftermarket heads Use with Handle # 53-0380 NOTE: Includes all aftermarket heads Cam bearing tool Use to install inner cam bearing, with handle # 53-0363. All of JIMS® bearing installers are designed with an angle to apply all the pushing force to the extreme outer diameter of the bearing. 53-0559 Sportster® (1957-90) Buell® (1987-90) Shoulderless valve guide remover tools Use to remove shoulderless valve guides including the newest 7mm size guides. On the 7mm guides there is no need to remove carbon off the guide because you remove from the spring side of head. Use chart to reference installer part No. Order separately 53-937 Use on all T/C 05-UP that use the 7mm valve guides, 04-UP XL, 04-UP Buell® Twins except 1125R Use on Installer Tool # 53-938 53-0380 Use on all Big Twin motors and Twin Cam® to 2004 Use on Installer Tool # 53-0377 NOTE: Includes all aftermarket heads


2017roadiron-cruiser_en
To see the actual publication please follow the link above