Page 1233

2017roadiron-cruiser_en

1233 ACCESSORIES FOR HYDRO PNEUMATIC WORK TABLE Wheel chock The wheel chock is engineered to flip up and lock the wheel and tire into place. To load the motorcycle into the wheel chock, push over the cradle, and when you go over the centering cradle it lock the front wheel into position.To allow for different wheel base the front wheel chock can be installed in one of five positions. Select a suitable position and align the holes. Secure in place using two thumbscrew knobs (A). Adjustable work table from 44" to 66" wide 47-271 Front wheel chock Adjustable in width to accomodate most UTV's Beam for jack The use of the beam for a jack will help simplify the removal of the rear wheel of the vehicle. Once the front wheel of the vehicle is anchored securely to the wheel chock, remove the two central panels of the platform. Place the beam (C) on top of the two tubes of the platform frame, and then place the jack in the center of the beam. Jack not included. Using the jack, lift the rear wheel of the vehicle sufficiently to allow the opening of the rear panels and facilitate the removal of the wheel. Adjustable work table from 44" to 66" wide 47-272 Beam for jack Adjustable in width to accomodate most UTV's Tool tray Removable tool tray. Use these trays to unclutter the surface of the platform and store your tools and fasteners within easy reach. Mounts and dismounts easily thanks to their hooks that grip into the holes of the platform, 16 locations possible. The platform can receive up to 8 baskets, 4 on each side of the table. Adjustable work table from 44" to 66" wide 47-273 12"X6"X5.5" Small basket Adjustable in width to accomodate most UTV's 47-274 12"X6"X12" Large basket Adjustable in width to accomodate most UTV's 47-271 47-272 47-274 47-275 47-276 Platform Extension kit for longer vehicles Easily fits to the front and rear of the Platform. For models : Can-Am 1000, Maverik 1000 and RZR 1000 four seats 47-276 Adjustable from 120'' to 168'' 3-wheels & snowmobile kit Set of central panels with additional ramp. This kit is required when the table is used for 3-wheels motorcycles or snowmobiles use these plates to fill the gap between the panels when they are open. Adjustable work table from 44" to 66" wide 47-275 3-wheels & snowmobile kit Adjustable in width to accomodate most UTV's


2017roadiron-cruiser_en
To see the actual publication please follow the link above