1356 NOTE # 0 A Heavy-Duty application is also available for this model. Standard duty = bike as sold new (excluding any bolt-on accessories) and rider weight under 200 lbs. with an occasional passenger. Heavy-Duty = additional add-on accessories or rider over 200 lbs or passenger use over 50% 01 or 1 Stock spacers may be shortened to fit. 03 or 3 Spacers are not included. They may easily be fabricated from aluminum or PVC pipe. 04 or 4 Triumph Damper Rod Kit available. Special Order PS #31-5050. 05 or 5 Spacer required is furnished with springs. 07 or 7 Install new 1.75” PVC spacer below stock metal spacer to allow adjustable cap to function. 08 or 8 Re-use the stock spacer. 09 or 9 Remove and discard the stock spacer. 10 No spacer is required 11 Some leading axles require spacer. See note 3 13 Spacer length must be calculated according to the instructions included with the fork springs 18 Cut the included spacer to length indicated 19 You must add a spacer (length indicated) to spacer furnished with springs or make a spacer that is the same length as the two combined 20 This particular bike has two different fork legs. The left fork leg requires the stock fork spacer to be shortened to 3.25””. The right fork leg requires the stock spacer to be removed and discarded; no spacer is needed in the right fork leg. ABS model, please refer to note #13. 21 Left fork: cut spacer to 6.75” long (remove 1.0”). Right fork: cut spacer to 2.63” long (remove 1.0”) R01 Travel limiters required: 0.25”. Order Motovan #76-5013. Rear Adjustable kit allows +1/2” to -2” lower. Burly Brand recommends a maximum drop of 1-1/4” R02 Travel limiters required: 0.50”. Order Motovan #76-5014. Does not lower the rear a full 2” on any Softail models using Harley Davidson # 54549-04 factory lowered shocks. R03 Travel limiters required: 0.75”. Special Order Motovan #76-5015. FLHRC requires saddle bag modifications to install rear lowering kit. R04 The shock recommended is slightly longer than stock. This may alter the fork angle slightly and give somewhat quicker steering. Extended clearances should be checked as well. Do not install rear lowering kit on FLHR or FLHX models. R05 The shock recommended is slightly shorter than stock. This may alter the fork angle slightly and give some what slower steering. When installing rear lowering kit; modifications to bag mounts may be required to gain sufficient clearance. Instructions included. R06 See air shock Improvement Kits A and B. Do not install rear lowering blocks on Sport, Deluxe, Custom, Hugger, or Low models (including “N” model). R07 Optional “Super Heavy Duty” spring is available, for the 12 Series, order Motovan #76-1364B. The air shock recommended is for a fully dress touring motorcycle. Use the “Sport Tuned” model for a standard motorcycle without touring equipment. Does not fit early 1989 models with clevis type shock mounts. R09 Suzuki and Kawasaki equipped with air compressors require an adaptor. Order Motovan #76-5086. “Slammer Kit” includes all parts needed to lower front & rear of the motorcycle. Side stand modification may be needed. R10 Honda with air compressors require an adaptor. Order Motovan #76-5082. “Slammer Kit” not for use on 1200S SPORT models. R11 K Models: Motovan #76-4015B is standard length 14.00” end-to-end. Also available in 3/4 inch shorter than standard, Motovan #76-4016B 13.25” end-to-end. Motovan #76-4201001 is standard length 14.00” end-to-end. R12 20 Series single shock for Honda GT650 Hawk sold without spring; re-use stock spring. R13 Check tire to fender clearance. If tire to fender clearance is insufficient, travel limiters are available. (See notes R1 to R3.) R16 Approximate stock shock length is 11.75”. R17 You must also order on Special Order PS #5011-038 sleeve kit. R18 Rear spring listed is a replacement for the stock OEM spring fitted to the stock OEM shock absorber only; not for use on 20 Series shock absorber. R19 The spring listed will fit stock OEM shock absorber as well as the 420 Series shock absorber, but note that part number listed for 420 Series includes installed spring. R23 Yamaha Road Star: Special Order Motovan #76-4201039 is standard length while Special Order Motovan #76-4201040 lowers the rear by 1”. R27 Suzuki 1200 Bandit: Special Order PS #420-1043 is a heavy-duty rear shock for heavy-weight applications. R31 Stock shock length is 12.25”. R32 Kawasaki Vulcan VN800: Special Order Motovan #76-4201048 for standard length. R33 Stock shock length is 12.12”. R34 Special tool Motovan #08-5509 is recommended for rear spring installation on both stock and 460 series shocks. R35 Yamaha V-Star 1100/Custom: Special Order Motovan #76-4201051 for standard length. R37 Stock shock length is 12.75”. R39 Kawasaki VN1600 Vulcan Classic & Nomad requires Special Order PS # 5011-054 spacer kit to install shocks (does not apply to 812 Series) or 14mm I.D. flat washers could be substituted. R41 Stock shock length is 14.30”. R42 Honda VTX1800C/F models require replacing top shock mounting studs to install Progressive Suspension shocks. Order two # 52452-MCH-000 “Rear Cushion Bolts” from your Honda Dealer. R44 Suzuki GSF1200SA with ABS requires Suzuki part numbers 09103-10101 and 08319-31107 for installing these shocks. R61 Standard factory length on this model varied between two length shocks. Check which length shock came on your bike to determine your standard length; “long or short”. R63 Special Order Motovan #76-302500 RAP adjuster upgrade must be used with the proper spring. Check your shock, if it doesn’t have either a 01-1005 or 01-1003 spring, then you must order the proper RAP adjuster with spring. R64 Special Order Motovan #76-302501 RAP adjuster upgrade must be used with the proper spring. Check your shock, if it doesn’t have 01-1002 spring, then you must order the proper RAP adjuster with spring. R65 Special Order Motovan #76-302503 RAP adjuster upgrade must be used with the proper spring. Check your shock, if it doesn’t have either a 01-1004 or 01-1005 spring, then you must order the proper RAP adjuster with spring. R66 Special Order Motovan #76-302504 RAP adjuster upgrade must be used with the proper spring. Check your shock, if it doesn’t have 01-1006 spring, then you must order the proper RAP adjuster with spring. R67 Special Order SP #30-2507 RAP adjuster upgrade must be used with the proper spring. Check your shock, if it doesn’t have 01-1002 spring, then you must order the proper RAP adjuster with spring. R68 Motovan shock #76-4655026 lowers R1150GSA approximately 20mm. R69 Motovan shock #76-4655025 raises R1150GS approximately 20mm. R70 Stock shock length is 14.00”. R71 Motovan shock #76-4351002 lowers R1150GSA approximately 20mm. R72 Motovan shock #76-4351003 lowers R1100GS & R1150GS approximately 20mm, and lowers R1150GSA approximately 40mm. R73 Motovan shock #76-4351004 raises R1150GS approximately 20mm. R74 Lowers the rear of the motorcycle by about 1”. TÜV Most of the shocks listed have TÜV approval. Refer to the most recent TÜV certificate for current listing.
To see the actual publication please follow the link above