Page 914

2016snowmobile

THREADLOCKING Permatex® Maximum Temperature Sleeve Retainer • OEM specified • Designed to increase the strength of press fit or retain slip fits where higher temperature resistance is required • Fixtures in 30 minutes at room temperature, but requires a secondary heat cure to generate high temperature resistance • Bonds cylindrical parts with diametral gaps up to 0.015” (0.35mm) Permatex® Threadlocker Gel Twist™ • Provides shear strength of 3,800 PSI on steel after 24 hrs. Blue medium Strength Gel and Red High Strength Gel in the patent-pending • Temperature range up to 230°C (450°F) Gel Twist™ applicator puts the threadlocker where you want it...on the parts! Applications: Bearing, bushings, cylinder sleeves, valve guides, cup/core plugs No more drips or solid stick globs. No more mess to clean or costly waste. and similar assemblies where higher temperature resistance is required. Permatex® Gel Twist™ Threadlockers provide “liquid quality” reliability without the problems. 27-24215 10g Blue (24215) 27-27115 10g Red (27115) 27-079 Bottle 36 ml (62040) Permatex® High Temperature Thread Sealant • OEM specified • Locks and seals threaded fittings • Designed to provide an extremely reliable seal on any metal pipe thread fittings and plugs • Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels • Lubricates threads for easy assembly and disassembly • Will not loosen in service but can be easily removed with hand tools • Parts may be repositioned up to 4 hours after application • Resists all auto shop fluids, fuels and gases • Temperature range up to 204°C (400°F) Applications: Head bolts into through holes, oil PSI sending units and sensors, oil and coolant lines, fuel fittings, rear axle fill plug, brake and power steering fittings. 27-234 27-234 Tube 50ml (59234) SPECIALIZED MAINTENANCE & REPAIR Permatex® Bearing Mount for Relaxed Fits Ultra Slick™ Engine Assembly Lube • OEM specified • Proper lubrication of metal mating surfaces is essential prior to starting a • High strength, medium viscosity anareobic adhesive for slip fit assemblies new or rebuilt engine • Fixtures in 10 minutes at room temperature • Has superior adhesion to component surfaces to prevent scuffing and galling • Provides 4,000 PSI shear strength on steel after 24 hrs. during initial start-up • Temperature range -54°C to 150°C • Meets or exceeds OEM performance specs for engine assembly lubricants (-65°F to 300°F) Applications: Engine bearings, camshafts, lifters, valves, guides and rocker Application: Wheel bearings, idler shaft, press fit bearings; replaces set shaft assemblies. screws, clamp rings, snap rings. 27-81950 Bottle 118ml (81950) * Available while supplies last 27-68050 50 ml (68050) 914


2016snowmobile
To see the actual publication please follow the link above