Page 913

2016snowmobile

THREADLOCKING Permatex red permanent strength® • Specified by manufacturers • Blocking nets permanent high strength for fasteners 3/8 in. to 1 in. (10 mm to 25 mm) *Medium strength threadlocker blue* • Supports heavy shock, vibration, chemicals and extreme conditions For nuts, bolts, screws, fittings. Prevents loosening. Prevents air, oil, fuel, • Prevents loosening by vibration and protects threads against corrosion hydraulic leaks. Prevents corrosion. Remove parts with regular tools. • Operating temperature -54 ° C to 150 ° C (-65 ° F to 300 ° F) Recommended by Comet for cam arm, pivot nuts and spider to stem threads. • A greater effort and localized heat may be required for disassembly 27-070 6 ml (24200) 27-071 Bottle 36 ml (24240) 27-073 Tube 6 ml (26200) 27-072 Bottle 50 ml (24250) 27-074 Bottle 36 ml (26240) Permatex® Red High Strength Threadlocker • OEM specified • High strength threadlocker for heavy-duty Permatex® Red High Temp/High applications • Designed for locking fasteners 3/8” to 1” Strength Threadlocker Permatex® Green Penetrating (10mm to 25mm) • OEM specified Grade Threadlocker • Well suited for permanently locking studs and • High temp / high strength threadlocker for • Low viscosity threadlocker press fits heavy-duty applications • For fasteners ranging from less then or equal to • Adds 3000 PSI holding power on slip and press • Designed for locking fasteners 5/8” to 1” 1/2” (12mm) in size fit assemblies (16mm to 25mm) • Wicks along the threads of pre-assembled • Withstands heavy shock and vibration • Withstands severe shock, vibration and heat fasteners to secure them in place • Protects threads from corrosion stress • Preventive maintenance procedures are simplified • Prevents vibration loosening • Protects threads from corrosion as threadlocker is applied after parts have been • Temperature range -54°C to 150°C • Prevents vibration loosening assembled (-65°F to 300°F) • Temperature range -54°C to 232°C • Prevents vibration loosening • Requires extra effort, localized heat or special (-65°F to 450°F) • Localized heating and hand tools are needed for tools for removal • Requires extra effort, localized heat or special disassembly Applications: Shock mounts, suspension bolts and tools for removal • Temperature range -54°C to 150°C (-65°F to studs, cylinder block studs, rocker arm studs, ring Applications: Camshaft sprocket bolts, crankshaft 300°F) gear bolts, frame bolts and similar fasteners subject bolts, idler bearings, press fit filler tubes, Applications: Bolts on alternators, air conditioning to higher shock and vibration. transmission input and output shaft threads, ring belts and distributor clamps, carburetor adjustment gear bolts and shock bolts. screws, hairline cracks. 27-25843 36 ml (27140) 27-19546 10 ml (27210) 27-294 Bottle 36ml (29040) 913


2016snowmobile
To see the actual publication please follow the link above