Page 645

2016snowmobile

102-108C-108EXP SPRINGS Color Model Outside diameter Spring Height Wire Diameter No. of Coils Spring Tension (lbs) Spring Tension (lbs) Rate of tension OEM to 1-1/8" to 2-3/8" White 102C 2” 3-3/4” .177 5-1/2 160 82 62 202467 382-1003 Yellow 102C/108 2” 4-1/16” .177 5-1/2 187 100 69 202551 382-1005 Blue 102C/108 2” 4-7/8” .177 5-1/2 187 118 55 202552 382-1006 Orange 102C/108 2” 3” .156 5-1/2 74 25 40 203472 382-1023 Pink 102C/108 2” 3” .177 5 142 45 92 203473 382-1024 White 102C/108 2” 3-1/8” .187 5 187 65 100 203474 * 382-1025 Black 102C/108 2” 3-1/8” .192 5 198 50 118 204115 * 382-1037 Silver 102C/108 2” 3-1/16 .192 5.2 190 85 84 204818 * 382-1051 Orange 94C 1-5/16" 233 74 205583A 382-1070 Green 94C 1-5/16" 150 66 205819A 382-1080 Brown 94C 212027A 382-1081 Yellow 94C 1-5/16" 3-1/4" .156 7-1/2 205 86 205818A 382-1082 White 94C 1-5/16" 3.06" .16 6-1/2 285 99 205820A 382-1084 Red For Tapered 94C 1-5/16" 160 75 205821A 382-1085 Silver 94C small 1-5/16" 2.46" .172 6-1/6 231 31 188 215097A 382-1091 Black 94C 1-9/16" 3.875" .156 8 156 85 66.8 205857A 382-1097 Purple 102C/108 2” 4-1/8” .192 5.2 254 136 92 207758 382-1126 Red 102C/108 2" 3-1/4” .207 5-3/8 254 92 130 207877 * 382-1130 Purple 102C/108 2” 3-15/32” .192 5.3 226 106 96 207888 * 382-1131 Gold 102C/108 2” 3-1/2” .207 6 296 129 123 208175 382-1135 Yellow/Green 102C/108 2” 3-13/32” .207 5-1/2 solid @ 1-3/16” 134 130 208228 * 382-1137 Yellow/Red 102C/108 2” 2-29/32” .207 5 275 93 146 208238 382-1139 Brown 102C/108 2” 2-7/8” .192 4.4 195 50 116 205040 382-1164 Silver/Red Yamaha 102C 2” 3.11” .187 5 189 67 97 209677 382-1171 Silver/Black 102C/108 2” 3-23/64” .192 5-1/2 203 85 91 209696 382-1172 Red/Blue Yamaha 102C/108 2” 3-1/16 .207 4-3/4 236 74 129 209833 382-1176 Silver/Green Hi-Alt. SRV 102C/108 2” 3.638” .187 5.7 196 99 78 209935 382-1177 Silver/Orange Hi-Alt. Yam.VMAX 2” 3.07” .207 5 283 99 142 209936 382-1178 Silver/Red Yamaha 102C/108 2” 3” .207 5 233 76 123 211361 382-1191 Red 94C 1-9/16" 2.85" .187 4-1/2 223 74 212631A 382-1270 Blue 94C 1-9/16" 3-3/4" .163 7 196 99 90.4 205847A 382-1482 Pink 94C 1-9/16" 3.56" .142 7 87 43 41.4 205858A 382-1483 Actual tensions of springs vary from poundages and rates listed herein which are only COMET spring tension objectives.Certified spring tensions would cause springs to be significantly more expensive. Industry standards for springs permit an initial variance of ± 10 %. To “pre-load” these springs for greater initial tension, up to 3 springs shims kit 382-1031 may be used with most of them... “Bottoming out” of a spring coil upon coil even once will hasten it’s deterioration... so avoid using 3 shims if the “Bottoming out” condition should result. To raise the Engagement by approximately 200 RPM, install 1 spacer above the spring. A maximum of 3 spacer may be installed, raising the tip engagement by approximately 600 RPM. Spring shim • One washer raises engagement 100 RPM • Use 1, 2 or 3 washers Qty. 382-1031 203849A (3) Spider Spacers are used in conjunction with Cam Arms for belt clearance spacing. (i.e. “B” Cam Arms require 2 shim) in102C to maintain spacing to allow engine to idle when used with 1-1/4” wide belt. “D” Cam Arms used in same scenario require 1 shim. These spacers can be used in any number, up to 2, with any Cam Arm if desired. The only real consideration being belt clearance at idle. 645


2016snowmobile
To see the actual publication please follow the link above