Page 582

2016roadiron

582 Electronic buttons “No Screws” Plug and play technology Adjustable fuel injection module Available through Techlusion the Enviro-Tune Gen-3 adjustable fuel injection module. Designed and engineered by Vallen Dick owner of Enviro-Tune and tuner for the Western and National champion of the Destroyer drag race series. Enviro-Tune introduces their Gen-3 adjustable fuel injection module. The Enviro-Tune Gen-3 is a load-based fuel injection module that does not require any splicing or modifications to your motorcycle during installation. The modules come pre-loaded with base maps for different models which can then be fine tuned for each individual’s riding style and bike with three buttons. Tuningis so easy that laptops and dyno machines are not required to maximize your motorcycle’s performance. Utilizing the latest in loadbased technology in fuel injection performance, The Enviro-Tune Gen-3 detects the exact amount of load on the engine at any RPM and any road speed and delivers the perfect amount of fuel to the engine for optimum performance. This is a superior design over fuel injection modules that work off of throttle position. As throttle positions can be the same at different speeds and with different loads on the engine like riding in the mountains, with the same amount of fuel injected into the engine in these varying conditions, performance can suffer. Model Year Harley Davidson FLT-FLH 08-09 114-0005 FLT-FLH 2006 114-0002 FXST 2006 114-0002 Dynatek Fusion EFI Fuel & Ignition Controller The Dynatek Fusion EFI is an ignition and fuel injection control module that plugs in-line with the bikes stock ECM using O.E.M. style connecters so no splicing or cutting of the stock harness is required. Significant horsepower can often be made by making timing adjustments as well as being able to correct detonation problems that may occur You can advance or retard your stock timing curve by +/- 10deg. using the included Control Center software and rev limiter. The Fusion EFI allows for very specific fuel adjustment of the entire range of throttle openings and RPM combinations. Adjustments can also be based on additional inputs such as cylinder head temp or gear position. Model Year OEM Harley Davidson Dyna 04-05 DFE-15-025 321-7877 Dyna 06-11 DFE-15-005 321-7745 Dyna 12-15 DFE-15-022 321-7758 Softail 01-06 DFE-15-024 321-7876 Softail 07-11 DFE-15-004 321-7744 Softail 12-15 DFE-15-021 321-7757 Softail Deluxe 09-11 DFE-15-007 321-7747 Street 500 2015 DFE-15-012 321-7581 Street 750 2015 DFE-15-014 321-7582 Touring 02-06 DFE-15-027 321-7879 Touring 08-13 DFE-15-011 321-7752 Touring 14-15 DFE-15-019 321-7756 Touring 2007 DFE-15-028 321-7880 V-Rod 02-07 DFE-15-026 321-7878 V-Rod 08-11 DFE-15-006 321-7746 V-Rod 12-15 DFE-15-023 321-7759 XL883 07-09 DFE-15-001 321-7742 XL883 10-13 DFE-15-009 321-7748 XL883 14-15 DFE-15-017 321-7754 XL1200 07-09 DFE-15-002 321-7743 XL1200 10-13 DFE-15-010 321-7749 XR1200 14-15 DFE-15-018 321-7755 EZFI™ Tuning on a Budget! There are times when you need a lot of control in a fuel injection system, but what about those tuning situations that just need a little tweaking? For example, if performance pipes and a high flow air cleaner are installed on a stock engine.The S&S® EZFI tuner is just the ticket for these less demanding applications that do not increase the engines compression ratio. The EZFI is an add-on module that connects to your existing stock ECM, giving you plenty of tuning control, but with a much lower price tag than replacing the existing module! In addition, since the EZFI module only effects fuel delivery, the other functions of the stock ECM, such as turn signals, safety functions, instruments, etc. are not effected.Fits all Delphi® equipped Harley-Davidson® motorcycles including 2001 Softail®, all 2002-’09 EFI big twins with 36pin Delphi system. Comes complete with software and instructions, plus Velcro® for easy mounting. 50-04881 EZFI Module Kit 08-UP (touring models) NOTE: Since the S&S® EZFI module does not control ignition timing, it is not recommended for engines with higher than stock compression ratios. • Provides economical tuning for stock engines with mild performance upgrades. • Add on to existing stock ECM. • Retain stock TSSM functions. • Fits all Delphi® equipped Harley-Davidson® models. Dynatek F.I. Controller The Dyna Fuel Injection Controller is a plug in module that plugs into the OEM wiring that offers 3 user selectable base fuel curves that are designed to improve engine operation and can be modified to suit a wide variety of modifications. These adjustments are made via 3 potentiometers that adjust the fuel curve in the proper ranges for the application. Fuel mixture can be enriched or leaned as required. As simple as turning a screw to adjust bottom, mid or high end performance. Model Year OEM Harley Davidson Dyna Models 01-05 DFCH-4 321-7417 Dyna Models 07-11 DFCH-11 321-7215 Dyna Models 2006 DFCH-8 321-7457 Softail Models 01-05 DFCH-4 321-7417 Softail Models 07-11 DFCH-10 321-7214 Softail Models 2006 DFCH-7 321-7452 Sportster 883 07-13 DFCH-12 321-7216 Sportster 1200 07-13 DFCH-13 321-7217 Touring Models w/ EVO Eng 97-98 DFCH-1 321-7414 Twincam Touring models 2008 DFCH-14 321-7845 Twincam Touring Models 09-13 DFCH-15 321-7846 Twincam Touring Models 2006 DFCH-6 321-7450 Twincam Touring Models 2007 DFCH-9 321-7213 Twin Cam Touring Models 02-05 DFCH-3 321-7416 Twin Cam Touring Models 99-01 DFCH-2 321-7415 V-Rod Models 02-14 DFCH-5 321-7418


2016roadiron
To see the actual publication please follow the link above