1115 SADDLEBAGS HOLDERS Khrome Werks OEM style saddlebag supports High quality supports include all necessary hardware. Sold in sets. Note: 50-380210 turn signal relocation kit is required when using supports on 82-89 Sportster and 82-86 FXR models. Note: For 90-93 Sportster models, directionals must be rewired and moved to rear fender. Black 349-0198 11-13 FXS®, 12-UP FLS® Chrome 349-1386 94-03 Sportster® (excSport) H-D#90799-94 (Requires Turn Signal Relocation Kit 50-380238 349-1814 04-UP XL 349-1816 84-05 FXST®, FLST®, 03-UP FLSTC, 07-UP FLSTN H-D#91790-84 349-1917 06-10 FXST®, 07-UP FLSTF® 349-1385 91-05 FXD®,FXDL®,FXDWG® H-D#90593-93, H-D#90589-91C 349-1905 06-UP FXD® Not FXDF, Not FXDWG Standard Mount license plate 349-1906 06-08 FXDWG®, 08-UP FXDF® 349-0022 08-up FXD, FXDWG, FXDF (not FDL) Will fit Dyna models with side mounted license plate Turnsignals relocation kit Chrome kit relocates the rear turn signals to allow for saddlebags. 50-380238 For XL models 94-Up only 56-1781 56-1780 Saddlebag connector belt 56-1781 Asymmetrical connector belt 56-1780 Symmetrical connector belt ALL BIKES ARE DIFFERENT PLEASE USE THIS AS A REFERENCE ONLY Cavaliers saddlebags are universally designed to fit over or under the seat of most standard motorcycles. How do I determine if the bag I want will fit my bike? The proper measurements that are required for our universally fitting bags are as follows: 1. Measure side to side, from the back of the saddle, (riders position) to the arm of the directional signal, and compare the width measure ments of the desired saddlebag. This measurement should be greater than the bag width. 2. Measure from top to bottom. Use the bottom of the seat pad to the top of the exhaust pipe as a reference, and allow no less than 1” greater than the height of the desired bag for clearance. 3. Saddlebag supports are strongly recommended, when available, for your make and model of motorcycle. (Ask your dealer.) 4. Secure all 4 side tie down tabs with the supplied cable ties. 5. Check saddlebags, fully loaded, to ensure that contact with the wheel or exhaust will NOT occur at any time. 6. Saddlebags with exterior snap flaps should be mounted with the snaps facing to the front of the bike. 7. Do not overload bags. Recommended maximum weight per side is 16 lbs.
To see the actual publication please follow the link above