1321 PRO SYSTEM II CHROME COMPRESSION FITTINGS Pro System II chrome plated compression end fittings are simple to assemble on the Pro System II nylon hose. Seven choices are available for connections to any master cylinder or caliper. Pro system II nylon hose This semi-rigid, colored nylon tubing is ideal for the custom bike builder who wants to fabricate their own brake hoses. Pro System II hose allows for maximum flexibility and the non-abrasive, small diameter hoses won’t scratch your custom paint job. Rated at 1200 PSI. Does not meet D.O.T. specifications. Use with Pro System II chrome hose ends. Black hose 3/16” 51-R3134 25 ft 51-R3135 50 ft 7/16” - 24 Male Part # 51-R4343C Quantity: 1 5/16” Replacement Ferrule Part # 51-R49009 Quantity: 10 Replacement Sealing Washers Part # 51-R49005C 10mm Part # 51-R49006C 7/16” Part # 51-R49007 12mm Quantity: 10 Pro System II chrome 10mm (3/8”) banjo 35° Part # 51-R4347C Pro System II chrome 7/16” banjo 35° Part # 51-R4348C Quantity: 1 Pro System II chrome 10mm (3/8”) straight banjo Part # 51-R4345C Pro System II chrome 7/16” straight banjo Part # 51-R4346C Quantity: 1 -3 Female Hose End Use with Adapter Fittings on pages 153-154 Part # 51-R4344C Quantity: 1 1/8” Pipe Male NPT Part # 51-R4340C Quantity: 1 3/8” - 24 Male Part # 51-R4342C Quantity: 1 90º 1/8” Male NPT Part # 51-R4341C Quantity: 1 How to assemble pro system II fittings 1) Cut colored hose to desired length using a knife. 2) Disassemble the 3-piece adapter fitting. 3) Slide the tapered end (taper first) onto the hose. 4) Slide the brass ferrule, with tapered end going towards the end of the hose. 5) Push the hose into the body until it bottoms out, then bring the tapered nut forward and tighten down. Note: To re-use Compression fittings, you need a 5/16” Replacement Ferrule 51-R49009.
To see the actual publication please follow the link above