Page 824

2016ATV

FAST-BOOT™ 1 2 3 4 5 6 Quick-shot ATV CV boot installation kit The Quick-Shot is a pneumatic ATV CV boot installation tool designed for the quick installations of Fast-Boot CV boots. The Quick-Shot / Fast-Boot combination provides the fastest, cleanest and most effortless method possible to replace a CV boot on any major brand ATV manufactured from 1985 to current. See instructions on back side. Quick-Shot Features: Quick Operation ... simply position boot on tool, apply air, position tool over CV joint, release air, slide boot in place ... nothing is faster or easier. Minimal Effort ... the tool utilizes air pressure to expand the CV boot for “over-the-joint” installations ... no physical effort is required to push a boot over an installation cone. Cleaner Installations ... no aerosol lubricant is needed to install a Fast- Boot with a Quick-Shot Installation Kit. Complete Kit ... each Quick-Shot Installation Kit includes a Quick-Shot, premium banding tool, knife and instructions ... all securely packaged in a 13-9715 sturdy storage case. The Quick-Shot is also available separately under p/n 13- 9714. Quick-Shot only The Quick-shot works exclusively with Fast-Boot ATV CV Boots! Other ATV CV 13-9714 Boots will not endure the type of stretch needed to install boots “over-the-joint”. Quick-Shot premium installation 13-9715 box included “Fast-boot” UNIVERSAL ATV constant velocity boot The Fast-Boot is a premium quality ATV CV Boot with a patented solid design that will provide enhanced wear and flex fatigue characteristics. The basic design is derived from a very successful automobile/truck/SUV CV boot of which over 10 million boots have been sold and installed over the past 15 years. This boot features a continuously convoluted design without right angles to more evenly distribute wear and minimize flex fatigue. The Fast-Boot is molded in the USA with premium neoprene rubber. Premium material insures a tough boot that will provide a long service life. This boot will run over 200 hours at a 23 1/2º angle and at 1,500 rpm with minimal flex fatigue and abrasion wear. Running at this angle approximates an ATV going in a tight circle which is where CV boot wear is at a maximum. One Fast-Boot part number provides almost total coverage for all current ATV boot applications. This includes both inner and outer joints and both front and rear axles for Honda, Polaris, Yamaha, Kawasaki, Bombardier, Suzuki, Arctic Cat ATVs from 1985. This is the only ATV boot available that can make this claim. The Fast-Boot utilizes many helpful design features to aid the installer during installation. The boot has wide well defined clamping surfaces so the installer knows exactly where to position the CV clamp. There are ridges located parallel to the clamping surfaces to keep the clamp in place during installation. Inside the boot you will find internal ridges and gripping surfaces to anchor the boot onto the CV joint. These internal design features, bolstered by the holding power of “free-end” style clamps, keep the boot locked in place. Fast-Boot Kit Components: • ATV CV FAST-BOOT • 80 grams CV Joint Grease Fast-Boot’s Superior Design backed by Premium Material combine to provide a • 5mm x 254mm Clamp longer lasting, more durable ATV CV boot. • 6mm x 482mm Clamp • Detailed Instructions 13-9710 nbr = no boot required Universal boot clamp kit The excellent quality clamps covers all ATV CV boot applications. Kit includes Deluxe boot clamp crimp tool four clamps. Made in the USA. The easy way to crimp all utility boot clamps. 13-9711 13-9716 824


2016ATV
To see the actual publication please follow the link above