Page 1346

2016ATV

Reservoir Cap Tool. Screws onto Schrader valve for easy removal of the Shock Spring compressor Pin Spanners bladder cap • For shocks and forks with caps with holes to 377-2601 TSCT 01 Reservoir Cap Tool • Provides easy removal and installation of most unscrew them shock springs without touching the spring collars • Unique “back-cut” prevents slippage • Features safety shaft locking device 377-2603 TMPS 01 4.0 & 4.5 mm pin spanner 377-2604 TMPS 02 5.0 & 5.5 mm pin spanner 377-2701 TSSC 01 Shock Spring compressor Race Tech tool for GSXR swingarm inserts Fork Spring compressor tool Many customers have asked for a Race Tech tool to help with the installation of the inserts on GSXR’s. Made of hardened tool steel, the 377-2710 • This unique fork spring compressor is designed to “TCPN 4301” SwingArm Pivot Nut Socket Tool work on most sport bikes and road racers. makes installing the inserts a breeze. Replaces the • It allows the spring to be compressed while the pricey OEM unit and also fits the SV650/1000, Shock seal “Bullet” tool fork cap is removed from the rod. DL650/1000, V-Storm and GSX-R750W/100W’s. • It can be used on of the bike on most models. • If you work on street cartridge forks, you gotta • Allow easy removal and installation of seal have one of these! 377-2710 TCPN 4301 assemblies 377-2697 TSSB 125 12.5x10mm shock seal head setting 377-2640 TFSC 01 Fork spring compressor Bullet tool tool 377-2698 TSSB 14 14x12mm shock seal head setting Bullet tool Race Tech deburring tool 377-2699 TSSB 16 16x12mm shock seal head setting Bullet tool The Race Tech Tool is a double-ended multi- 377-2642 TSSB18 18x16mm shock seal head setting Bullet function tool that can be used by hand, by lathe tool or attached to an optional Deburring Tool Base. 377-2694 TSSSB1812 18x12mm shock seal head setting Bullet Quickly chamfers and removes burrs from the tool inside and outside of the case mouth on all calibers from 17 to 45. 377-2714 TMDB 08 Shock seal head setting tool Shock bushing driver set Allow easy removal and installation of seal assemblies. • Allows mechanics and technicians to easily install 377-2696 TSSS 03 33-36mm shock seal shock shaft bushings into seal heads head setting tool Reservoir Cap Setting Tool • Comes with 12.5, 14, 16, 18mm bushing drivers. 377-2695 TSSS 01 40-50mm shock seal head setting tool Eliminates damage to the Schrader valve when tapping down the bladder cap to expose the snap ring on YZ’s. 377-2631 TSBD SET Shock shaft bushing driver set 377-2602 TSRC 01 Reservoir Cap Setting 377-2645 377-2646 Tool 377-2648 Sag Master™ Race Tech tool for swingarm 377-2647 • The Sag Master is a tool that makes measuring inserts Shock Nitrogen charging tools “Race Sag” a snap because you read it directly. Generous tool has 4 sizes for one unit. Race Tech No more subtracting! • Also useful in determining proper spring rates • Nitrogen gauge does not require a wrench andHex Axle Tool 377-2713 (TFHD 1724) for late and monitoring linkage and seal drag. Tool is made from zinc plated steel for durability, stems without an extension.it easily reaches those hard to get recessed valvemodel sport and dirt bikes. The Race Tech Hex Axle • Comes with complete instructions and, doubles as has four different sizes (17, 19, 22, and 24mm) • Nitrogen hose has a special 800 psi hose with a tape measure. with a 3/8 inch square drive at both ends to “Finger tight” 1/4” flare nut quick couplings. 377-2625 TSSM 01 Sag Master™ race sag facilitate a torque wrench. The 377-2713 (TFHD • Nitrogen Regulator allows for easy & accurate setting tool 1724) fits Buell XB’s, Honda CBR’s, Kawasaki ZX’s, regulating of nitrogen from the bottle to the Suzuki GSX-R/SV/TL/V-Storm, and Yamaha R1/ working pressure gauge; 0-300 psi. T-Handle tool set R6 and many other models. This tool is suitable for • Nitrogen Needle is designed for gas charged many uses beyond axle removal as the tool’s 17 shocks with self-sealing type rubber valves; use with • Improved design with deep Nitrogen Gauge 377-2645.and 19mm ends are also useful for applications sockets such as fork caps, inspection covers, etc. • Includes 8, 10, 12, 14, 17 377-2645 TSNG 02 Nitrogen gauge mm socket T-wrenches 377-2646 TSNH 48 Nitrogen Hose 377-2647 TSNR 01 Nitrogen Regulator 377-2703 TTHS 02 T-Handle tool set 377-2713 TFHD 1724 377-2648 TSNN 01 Nitrogen needle 1346


2016ATV
To see the actual publication please follow the link above