Page 809

2013 RI Cruiser

VALVE TRAIN TOLS Valve guide driver set Use for guide removal and installation on all models. 3 piece set. Manufactured from 1144 stress proof steel. Including Twin Cam® 53-0002 Evo® valve guide seal tool Use to install the valve guide seal, with JIMS® handle (53-0380). Designed for stock style guides with an O.D. of about .560”. Use on all EVO® 1984-present 53-0376 Big Twin®/Twin cam® Head holder tool Use to hold head in vice through spark plug hole. has 14mm and 12mm ends. Use on Big Twin® (1948-present), Sportster® (1957-present) and Buell® (1987-present). 53-0165 Evo® head bolt torque gauge This accurate gauge allows the measuring of 900 when tightening Evo® head bolts. Torqueing sequence lasered on gauge with instructions.Use on all Evo® models (1984-present) 53-0188 Evo valve guide tool Use to install shoulderless valve guides to the proper depth, with handle no. 53-0380. Designed for stock style guides with a O.D. of about .560”. If installing a shouldered guide, use either JIMS® tool no.53-0002 or 53-0143. Use on all EVO® motors. 53-0377 Big Twin®/Twin Cam® Valve spring compressor tool Use on all O.H.V. Big Twin® and Sportster®. 53-0545 Exhaust stud drill plate This tool is designed to guide and keep alignment of drill bit in order to drill out broken exhaust stud, completely. Use on Big Twin® (1984-present), Sportster® (1986-present) and Buell® (1987-present). 53-0060 Evo® valve guide tool handle Use to remove shoulderless valve guides. Use with JIMS® #53-0371/53-0376/53-0377. 53-0380 CAM TOLS Cam bushing installer drill jigs Jig comes complete with instructions. Use to install and drill dowel pin hole in cam bushing to the factory location. Supplied with drill. 53-0009 Big Twin® (1936-69) 25597-36 53-0010 Big Twin® (1970-99) 25581-70 53-0011 Sportster® (1957-90) 25588-57 Buell® (1987-90) 53-0012 Big Twin® (1937-48) Sidevalves Sportster® (1954-00) Buell® (1987-00) 25586-37 Big Twin® Cam seal installer and remover You can install and remove a 1970-present cam seal, without removing the cam cover. The new seal is pressed in with the same tool, square and flat for a no leak fit. This tool will also remove cam cover from case. Use on Big Twin® (1970-present). Single cam only 53-0144 Cam bearing tool Use to install inner cam bearing, with handle # 53- 0363. All of JIMS® bearing installers are designed with an angle to apply all the pushing force to the extreme outer diameter of the bearing. 53-0558 Big Twin® (1958-1999) and S&S 53-0559 Sportster® (1957-90) Buell® (1987-90) For pricing, visit www.motovan.com in the dealer section. 809


2013 RI Cruiser
To see the actual publication please follow the link above