Page 398

2013 RI Cruiser

CLUTCH COMPONENTS (CONT.) 51-HDP9K BIG TWINS®/EVO 1984-89 51-HDP9K Kevlar Clutch Kit This kit consists of six friction plates. The plates are wider than stock and provide 25% greater surface area contact. Replaces H.D. #37930-84. 51-HDP9CF Carbon Fiber Clutch Kit This kit consists of six friction plates. The plates are wider than stock and provide 25% greater surface area contact. Replaces H.D. #37930-84. 51-HDP10 Steel Drive Plates (7 required). 51-HDP17 Clutch Kit Fits late 1984 to 1989 wet clutch model Big Twins. Consists of 6 frictions, 7 steels. 51-MT73 Clutch Spring, Heavy Duty Attractively skinpacked. Suitable for street applications. 51-MT84 Adjuster Plate Heavy-duty, steel part. Minimizes wear factor. Can be used with stock spring or any after market spring. 51-SR5 Fits L84- 1989 Big Twin®* BIG TWINS CLUTCH COMPONENTS 1941 THRU EARLY 1984 51-HDP5M HDP5M Finally, a single clutch kit for all application, wet or dry. All Big Twins® from 1941 -E84. 51-HDP5EPK Extra-Plate Clutch Kit Consists of six bonded friction plates, one steel plate and a set of 51-HDP4B Clutch Hub Liner/Backing Plate Comes complete with necessary rivets for mounting to clutch 51-HDP6 Steel Drive Plates Same as H. D. No. 37975-41. Sold individually. Models thru 1967 require 51-MT41 Clutch Springs - 1941-67, Replacement, 50 lbs @ 1-1/8'’ 51-MT68 Clutch Springs - 1968-83, Replacement, 40 lbs @ 1-1/8" 51-MT69 Clutch Springs - 1941-83, Heavy Duty, 68 lbs @ 1-1/8'’ HARLEY® "45" 51-MT41 Clutch Springs - 1941-67, Replacement, 50 lbs @ 1-1/8'’ Big Twins® 1990-1997 51-HDP11CF Carbon Fiber Consist of 5 friction plates made on a steel core, using our exclusive “molded” Carbon Fiber Friction Compound. It will handle all your clutch needs, whether you’re running an open belt drive, sealed primar y or conventional set-up. Resist “Glazing” which causes chatter/noisy engagement. T olerates extreme heat, suitable for all High Performance applications. The porosity of the compounds adapts it per fectly to wet applications. For a smooth, positive, no slip clutch action. Note: On 1967 and older models, an extra steel plates is required (our 51-HDP6). heavy-duty clutch springs. On pre-1968 models, an extra steel drive plate is required (either stock or our 51-HDP6). This kit adds approximately 20% more clutch surface area. hub. three plates. 1968 and later models require four plates. (Set of 10) (Orange). (Set of 10) (Blue). (Set of 10) (Grey). (Set of 10) (Orange). Clutch Kit This kit consists of eight bonded friction plates. Replaces H.D. Nos. 37910-90 and 37911-90 friction plates. 51-HDP11EPCF Carbon Fiber "Extra-Plate" Clutch Kit Consists of nine friction plates and eight steel drive plates. Adds 12% more surface area to clutch pack. (Note: Double steel drive plate not used with this kit.) 51-HDP11EPK Kevlar "Extra-Plate" Clutch Kit Consists of nine friction plates and eight steel drive plates. Adds 12% more surface area to clutch pack. (Note: Double steel drive plate not used with this kit.) 51-HDP11K Kevlar Clutch Kit This kit consists of eight bonded friction plates. Replaces H.D. Nos. 37910-90 and 37911-90 friction plates. 51-HDP12 Steel Drive Plates Six required. (NOTE: You must re-use stock double, riveted drive plate). 51-HDP16 Steel Drive Plates Fits 1990 To 1997 EVO Big Twins and 1991 & later 5-speed Sportster & Buell models. Consists of 8 frictions & 6 steels. (Note: You must re-use stock riveted, double-spring plate.) 51-MT77 Clutch Spring-Heavy Duty (1) 25% stronger than stock, race applications, only. 51-MT81 Clutch Spring-Standard (1) SPORTSTER® & BUELLS® (except XB9R/XB12R) 1991-LATER 51-HDP11CF Carbon Fiber Clutch Kit This kit consists of eight bonded friction plates. Replaces H.D. Nos. 37910-90 and 37911-90 friction plates. 51-HDP11EPCF Carbon Fiber "Extra-Plate" Clutch Kit Consists of nine friction plates and eight steel drive plates. Adds 12% more surface area to clutch pack. (Note: Double steel drive plate not used with this kit.) 51-HDP11EPK Kevlar "Extra-Plate" Clutch Kit Consists of nine friction plates and eight steel drive plates. Adds 12% more surface area to clutch pack. (Note: Double steel drive plate not used with this kit.) 51-HDP11K Kevlar Clutch Kit This kit consists of eight bonded friction plates. Replaces H.D. Nos. 37910-90 and 37911-90 friction plates. 51-HDP12 Steel Drive Plates Six required. (NOTE: You must re-use stock double, riveted drive plate). 51-HDP16 Steel Drive Plates Fits 1990 To 1997 EVO Big Twins and 1991 & later 5-speed Sportster & Buell models. Consists of 8 frictions & 6 steels. (Note: You must re-use stock riveted, double-spring plate.) 51-MT77 Clutch Spring-Heavy Duty (1) 25% stronger than stock, race applications, only. 51-MT81 Clutch Spring-Standard (1) 51-HDP5M 51-HDP4B 51-HDP6 398 For pricing, visit www.motovan.com in the dealer section.


2013 RI Cruiser
To see the actual publication please follow the link above