Page 207

2013 RI Cruiser

VALVE RACING SPRINGS Testimonials At T-Man Performance, our goal is to produce the highest quality cylinder head on the market and to do that we have to use the highest quality components, that’s why we’ve elected to use AV&V valve springs. AV&V valve springs maintain their consistency and reliability even with the higher lift cams and higher revving motors that T-Man is known for. Three quick examples include my personal bike with over 250 wide open dyno pulls during training seminars, and two of our client’s cycles, one with 16 000 miles and the other with 20 000 miles on the springs, all three were within 1% of the original specifications on tear down. AV&V springs provide the quality that we trust for our performance products. TR Reiser of T-Man Performance, a leader in the motorcycle industry and recognized for quality, high performance heads and motors. Beehive Spring kit for twin cam, evo & Sportster For Single Groove and Triple Groove 7mm valves AV&V valve springs are manufactured from the ultra clean high silicon Kobe alloy wire then micro shot peened and nitrided to resist in the most severe environments. CNC machined Extreme Duty 9 deg. locks. (53-2291 only). Ultralite Chromoly forged retainers. Coil bind Seat pressure Lift 53-2284 1.200” 155@1.860”/384@1.350” .600” 53-2291 1.150” 178@1.860”/395@1.350” .650” High performance Valve Spring kit for pan & shovel heads Manufactured from ultra clean high silicon & vanadium alloy wire. CNC machined tight fit locks. Light weight Chromoly retainers. Coil bind Lift Seat pressure Complete kit 53-2295 0.850" .470" 155@1.375”/300@0.980” 53-2296 0.850" .530" 155@1.455”/320@0.980” Lower collars 53-2239 0.850" For pricing, visit www.motovan.com in the dealer section. 207 0.850" .470" .530" 155@1.375”/300@0.980” 155@1.455”/320@0.980” Retainers 53-2286 0.850" 0.850" .470" .530" 155@1.375”/300@0.980” 155@1.455”/320@0.980” Springs only 53-2294 0.850" .470" 155@1.375”/300@0.980” 53-2112 0.850" .530" 155@1.455”/320@0.980” Valve locks 53-2287 0.850" 0.850" .470" .530" 155@1.375”/300@0.980” 155@1.455”/320@0.980” *Note: These springs are not bolt-in. Always make sure to check the minimum spring spacing and to keep a minimum of .060” before coil bind, at full lift. You may need to machine the spring seat with Goodson spring seat cutter #VSS-1680HD and/or use AV&V upper spring collar kit #R530-4 and/or machine the valve seat deeper to get the correct spring spacing. For reference, on late style Shovel (80-84), with a 1.630” valve stem protrusion, the spring spacing is +/-1.375”. Retainer & lock kit for single groove valves and stock springs To use AV&V 7mm Single groove valves with stock beehive springs 53-2288 Chromoly 7mm single groove retainer and lock kit (set of 4) Beehive Spring kit for twin cam, evo & Sportster (5/16 valves) AV&V valve springs are manufactured from the ultra clean high silicon Kobe alloy wire then micro shot peened and nitrided to resist in the most severe environments. CNC machined Extreme Duty 9 deg. locks. Ultralite Chromoly forged retainers. Coil bind Seat pressure Lift 53-2292 1.200” 165@1.860”/384@1.250” .600” 53-2293 1.150” 185@1.860”/370@1.250” .650” Extreme duty Valve Spring kit for twin cam, evo & Sportster (5/16 valves) AV&V valve springs are manufactured from the ultra clean high silicon Kobe alloy wire then micro shotpeened and nitrided to resist failure under the most serious conditions when using a Bob Wood, Zippers and other serious high performance cams. Recommended for .640” to .675” lift. 1.365” Top retainers for better clearance inside rocker covers. Titanium retainers. Coil bind Seat pressure Lift 53-2246 1.080” 185@1.860”/460@1.160” .675” High Performance Valve Spring kits For Twin Cam, Evo & Sportster (for 5/16 valves) AV&V valve springs are manufactured from the ultra clean high silicon and vanadium alloy wire. 1.375” Top retainers for better clearance inside rocker covers. Available with chromoly retainers. Coil bind Keepers Seat pressure Lift 53-2243 1.080” Steel 155@1.875”/175@1.825” .600” 53-2114 1.080” Steel 185@1.860”/460@1.160” .650” Note: AV&V .650” springs are made from ultra clean Kobe wire. High Performance Valve Spring kits for Twin cam, evo & sportster 7mm triple groove valves AV&V valve springs are manufactured from the ultra clean high silicon and vanadium alloy wire. 1.375” Top retainers for better clearance inside rocker covers. Available with chromoly retainers. Coil bind Seat pressure Lift 53-2245 1.080” 160@1.800”/352lb@1.180” .600” Note: Smaller valve seals (AV&V #V7MM) must be used with AV&V 7MM double spring conversion


2013 RI Cruiser
To see the actual publication please follow the link above