Page 188

2013 RI Cruiser

PAN & SHOVEL TAPPETS Stop tappet noise forever with big axle “Powerglide™” Hydraulic tappets for Pan and shovel performance Cams (Will also work with solid style cams) Now you can have the same hydraulic function as EVO’s. Are stock hydraulic units wearing you down? Are you installing solid tappets just so you will know what adjustment your tappets are set at? STOP! You need the “Powerglicle™” solution. At about 30% cost savings and about 85% more stability, these tappets are perfect in Panhead and Shovelhead tappet blocks H.D.® Part #18600-53 (front) and #18610-53 (rear). Will also work in any tappet block and case having oil passages to tappet blocks pre EVO. These tappets will accommodate a 0.550” lift or more, depending on the cam base circle size, without modification, when using JIMS® tappet blocks No.1095. If using stock H.D.® tappet blocks, check for roller to block clearances. Use with H.D. No. 17904-66 or JIMS® #2369 pushrods for Shovelhead. For Panhead, use H.D.® #17905-53B or JIMS® #2404 pushrods. Billet steel performance powerglide hydraulic tappet for Pans® & Powerglide™ Pan® & Shovel® hydraulic tappet Std. O.D. is 0.731”. 53-0253 Use on Big Twin 1953-84 Aftermarket and S&S engine 53-0730 Oversize +0.002” 188 For pricing, visit www.motovan.com in the dealer section. Shovel® Note: Surpasses and replaces H.D.® #18522-53 toppet and H.D.® #17920-53A hydraulic unit. We recommend using with JIMS® tappet blocks #1095. Standard outer diameter is 0.731“ (Caution some H.D.® blocks 1978-84 have oil drain hole location problems). Hydraulic tappet Superseded by 18522-53. Std. O.D. is 0.731”. Individual tappet weighs 89 grams. 53-0274 Use on Big Twin® 1953-84 sold each 53-0281 Oversize +0.002” sold each 53-0283 Oversize +0.005” sold each Note: Use with 51-C30150 hydraulic unit. For solid tappets use #53-0301 Solid Ajustable tappet Superseded by 18492-48. Std. O.D. is 0.731”. Individual tappet weighs 86 grams. Use on Big Twin 1948-84 Aftermarket and S&S® engines. Use with Jims® tappet. blocks #1095 or 1095C. 53-0304 STD 349-6162 Over Size T.005 Note: For solid adjustable tappets. Adjusters and nuts sold seperately.


2013 RI Cruiser
To see the actual publication please follow the link above