Page 182

2013 RI Cruiser

ANDREWS CAMS FOR EVOLUTION BIG TWINS® Grind Timing CL Duration .053 Duration .020 Valve Lift Lift @ TDC Springs Application Touring and performance cams Stock 88-91 (L) 01/37* 53/-01* 108 117 218 232 266 280 .495 .495 .091 .083 Stock Listed for reference. 1984-1987 cam is 212 deg intake, 202 deg. exhaust, .472” lift on both valves. Stock 92-up (N) (w/carbs) -02/30* 31/-09* 104 110 208 202 250 242 .472 .472 .070 .049 Stock Listed for reference. “N” cam is close to ‘84-’87 specs. uel Injector “O” cams are 200 deg int. and 216 exh. 349-4589 EV23 10/30* 40/08* 100 106 220 228 255 264 .498 .498 .134 .121 Stock Mild bolt-in street cam with more torque and HP for all around riding with stock comp ratio. Similar to stock L cam but more output. Pulls from 1800-5200 RPM. 349-4584 EV13 15/31* 45/13* 98 106 226 238 .270 .280 .485 .495 .161 .148 Stock Bolt-in street/touring cam for heavy bikes. Much more low and mid-range power than either stock cam. Best cam for 2 up riding with camping gear and side ars. 349-4587 EV27 20/36* 46/14* 98 106 236 240 270 274 .495 .495 .182 .166 Stock A great bolt in cam for stock EV80 engines using state of the art design. Very strong, broad torque band which will pull hard from 2000 to 5500 RPM. 349-4586 EV3 21/37* 43/15* 98 104 238 238 280 280 .495 .495 .197 .159 Stock Bolt-in street cam for light bikes (FXRS, etc.). Lots more mid-range and upper end power. Smooth idle 2800 to 6500 RPM cam with stock heads and springs. 349-4595 EV46 25/41* 49/17* 98 106 246 246 283 283 .495 .495 .207 .163 Stock Bolt-in performance cam; state of the art ramp design. Longer duration than EV3 but higher static comp. pressure; wide torque band; 2600 to 6000+ RPM. 349-4593 EV51 28/44* 54/22* 98 106 252 256 286 290 .510 .510 .233 .195 Stock Easy installation; longer duration for modified street engines with hydraulic lifters and 9.0 or higher compression ratio. Power range from 2800-6500 RPM. 349-4691 EV59 28/48* 56/24* 102 106 256 260 290 294 .560 .560 .236 .208 HI-LIFT Upgraded EV57, fast ramps for modified 80 to 88 inch motors. Use with AP springs and collars. Very broad power band; 6000 RPM. OK for hydraulic lifters. 349-4692 EV72 30/54* 60/28* 102 106 264 268 298 302 .560 .560 .246 .230 HI-LIFT Upgraded EV7, for 92 in. + street motors. For use with Andrews springs and heat treated steel collars. Very broad power band, 2800-6000 RPM. OK for hydraulic lifters. (*) Timing and duration listed at .053 cam lift. Cam bearings 349-4699 EV 80 Cam bearing, H-D 9058 Andrews 182 For pricing, visit www.motovan.com in the dealer section.


2013 RI Cruiser
To see the actual publication please follow the link above