1078 Saddlebag relocation kit 50-380238 Relocation kit SADDLEBAG SUPPORT Cavaliers saddlebags are universally designed to fit over or under the seat of most standard motorcycles. How do I determine if the bag I want will fit my bike? The proper measurements that are required for our universally fitting bags are as follows: 1. Measure side to side, from the back of the saddle, (riders position) to the arm of the direc tional signal, and compare the width measure ments of the desired saddlebag. This measurement should be greater than the bag width. 2. Measure from top to bottom. Use the bottom of the seat pad to the top of the exhaust pipe as a reference, and allow no less than 1” greater than the height of the desired bag for clearance. * Saddlebag supports are strongly recommended, when available, for your make and model of motorcycle. (Ask your dealer.) * Secure all 4 side tie down tabs with the supplied cable ties. * Check saddlebags, fully loaded, to ensure that contact with the wheel or exhaust will NOT occur at any time. * Saddlebags with exterior snap flaps should be mounted with the snaps facing to the front of the bike. * Do not overload bags. Recommended maximum weight per side is 16 lbs. HARLEY™ ALL BIKES ARE DIFFERENT PLEASE USE THIS AS A REFERENCE ONLY Check out motovan.com for product information, pricing, press releases, etc. on all the parts and accessories available for motorcycles, MX, ATVs and snowmobiles. www.motovan.com The Source For Powersports Parts And Accessories.
2013 RI Cruiser
To see the actual publication please follow the link above