Page 1386

2013 Moto En

1386 RETAIL BATTERY CHARGERS AND TESTERS OptiMate 1 (0.9 AMPS) The 3 stage plug-in maintaining charger that will keep your battery fully charged when not in use. Easy to use, simply connect to the battery, then the power socket and the rest is automatic. Recommended for use on all types of 12V lead-acid batteries. Automatic 900mAmp charger for 12V lead-acid batteries of all types - std filler caps, sealed (MF) maintenance free and GEL. Ideal for maintaining batteries of seasonally used or stored vehicles. 3-STEP CHARGING PROGRAM - charges the battery with 0.9A current and keeps the battery fully charged when not in active use, without risk of over-charging. 100 % SAFE - Includes an auto-resetting thermal fuse switch that prevents the charger’s output circuit from exceeding a safe temperature. EASY TO USE - Simply connect to battery, then to the power socket and the rest is automatic. Recommended for use on all types of lead-acid batteries up to 50Ah Supplied with 2 detachable & interchangeable SAE battery connectors. SAE-71 Weatherproof permanent ringlet connector & SAE-74 Battery clips. Approved to UL & CSA safety standards. 3 year limited warranty. 08-0486 OptiMate 3+ (0.6 Amps) OptiMate 3+ desulfater-charger saves neglected, deep discharged batteries other smart chargers can’t! It will safely maintain your vehicle’s battery during long term storage. During maintenance it “floats & tests” 30 minutes on, 30 minutes off, so the battery is always 100% ready, but never overcharged. • Vent free enclosure • SAE connectors • Moulded wall mounts. Recommended for all 12V lead acid batteries from 2Ah to 45Ah. 08-0481 OptiMate 5 (2.5 AMPS) OptiMate 5 can SAVE a neglected / sulfated lead-acid battery unable to accept charge from the engine charging system (even after jump starting). The multi step charging system is suitable for any type of 12V lead-acid battery. During the 24/7 auto storage control the battery is tested every hour and recharged as necessary. The universal input system accepts AC power between 100 to 240VAC (incl. generator / inverter). • Sealed enclosure • New SAE connectors • Moulded wall mounts Recommended for all lead-acid batteries from 7.5Ah – 120Ah 08-0482 OptiMate 4 Dual OptiMate 4, the acclaimed battery saving charger and maintainer, has become the new reference in motorcycle battery care due to its advanced micro processor system. The latest version is set to enhance that reputation even further! OptiMate 4 DUAL PROGRAM includes further advancements in battery recovery and testing AND a 2nd program that automatically charges and tests through the 12V port on motorcycles fi tted with CAN-bus. KEYLESS activation and unsupervised long term battery care. THAT is NEW. OptiMate 4 DUAL PROGRAM. YES, we CAN-bus! • Multi-stage desulfation saves neglected batteries • Optimises battery power and life • Safe long term battery care • Charge battery DIRECT or via CAN-bus • TEST at start and TEST every hour 08-0487 Direct 08-0488 CAN-Bus ready Accumate 6/12 (0.9 Amps) Maintainer For 6v & 12v Batteries A 0.9A charger for 6 and 12 Volt batteries. Select the voltage, hook it up to the battery and this reliable, temperature compensated, 3-step charger will do the rest. The program is ideal for starter and Deep Cycle / stand-by batteries and is totally safe for long term connection to the battery without overcharging. 08-0442 OptiMate 2 (0.6 Amps) Sealed, weatherproof, global power input, smart charge. The most cost effective solution for long term maintenance of 12V batteries in any vehicle/ craft that is stored in or outdoors. Sealed weatherproof enclosure with builtin wall mounts. Fully automatic with 4 charging stages including low voltage save for batteries down to 2V. With 0.8A constant current it automatically brings the maintenance charge mode to keep the battery at 100% ready. Ideal from 3Ah to 96Ah capacity. 08-0489


2013 Moto En
To see the actual publication please follow the link above